The CAN32 AVB™ bridge card provides third-party AVB enabled digital audio products the ability to connect and interface with Q-SYS™ while maintaining low latency.
Type 2 hardware provides new cables and connectors between the I/O cards and main boards in Cores and I/O Frames. Due to this change, the Type 2 hardware is not physically compatible with the older hardware. You can still integrate the new I/O Frames and Cores in the same system with older hardware, but the I/O cards are not interchangeable. Type 2 hardware can be identified by a yellow label on the back of the Core and I/O Frame, and the bottom of the I/O cards.
|
Dante Input/Output CAN32 |
|
|---|---|
|
Description |
AVB network audio input and output card |
|
Maximum audio channel capacity: |
0x32, 32x0 or 16x16 channels |
|
Also configurable as |
8x8, 4x4 and 2x2 |
|
Stream configurations limited by AVB, from https://abc.statusbar.com/: Network Speed: AVB BW Allocation: Stream format: Sample rate: Bits/Sample: AAF Samples/Frame: |
100 baseT 90% 1 AM824 (non-blocking) 48 kHz 24 default |
|
Card I/O
|
|
|
Sample Rate |
48 kHz only |
| SRC (Sample Rate Converter) |
Between AVB and Q-SYS (always) There is an SRC on the inputs and outputs, with a delay of 2 ms each. |
|
Configurable AVB clock |
Internally generated (not related to Q-SYS clock) Recovered clock from one of the AVB input streams |
| Network data rate: 100 Mbps | |
|
Indicators Yellow
Green |
“SPEED” LED indicates connection to 100 Mbps link partner (network switch or end point) when illuminated
“LINK/ACT” LED indicates network link established when illuminated solid and indicates network transmit and/or receive activity when blinking |
|
Connectors |
Two female RJ-45 connectors |
1. Most switches will be set to 75% by default to allow for other traffic.) |
|
| Card I/O | Valid Streams / Channels |
|---|---|
| 2x2 |
1 / 2 2 / 1 |
| 4x4 |
1 / 4 2 / 2 4 / 1 |
| 8x8 |
1 / 8 2 / 4 4 / 2 8 / 1 |
| 16x16 |
1 / 16 2 / 8 4 / 4 8 / 2 14 / 1 |
| 32x0 or 0x32 |
1 / 32 2 / 16 4 / 8 8 / 4 12 / 2 |
The Q-SYS CAN32 AVB I/O Card is user configurable via Q-SYS Designer version 4.2.x or greater, including ability to make Direct connections via Full Stream ID (no AVDECC in Q-SYS)
Configurable via third-party software applications supporting the AVDECC control protocol as defined in IEEE 1722.1
The Q-SYS CAN32 AVB I/O Card supports the following IEEE 1722.1 AVDECC descriptors:
The Q-SYS CAN32 AVB I/O Card supports the following IEEE 1722.1 AVDECC commands:
© 2009 - 2016 QSC, LLC. All rights reserved. QSC and the QSC logo are trademarks of QSC, LLC in the U.S. Patent and Trademark office and other countries. All other trademarks are the property of their respective owners.
http://patents.qsc.com.
Related Topics