The Parametric Equalizer is a variable equalizer allowing you to individually adjust the Gain, Bandwidth and center Frequency of up to 32 frequency bands. You can also Bypass individual bands. Master controls, affecting all bands, include Bypass, Invert, Mute and Gain. Additionally, you can change any or all of the bands to either a high or low-shelf equalizer, allowing you to vary the gain of all frequencies, as a group, above or below a selected frequency. At the selected Frequency, the gain changes approximately +3dB or -3dB depending on wether the shelf is adding or reducing gain.
|
Control Name |
Function |
Range / Values |
|---|---|---|
|
Response Panel |
The Response panel provides vertical and horizontal cross-hairs with a dynamic frequency and level read-out. Place the mouse courser over the graph to activate the cross-hairs. When the Phase control is activated, the horizontal cross-hair line to the left of center represents the normal curve, the right side represents the phase curve. The readout is only for the normal curve. |
X-Axis = Frequency, 20Hz to 20kHz Y-Axis Left = dB, -24dB to 24dB Y Axis Right = Phase, -180° to 180° |
|
All (Bands) |
A toggle button that activates a graphical display all bands of the equalizer. When the button is not enabled, the Response Panel displays a composite of all the bands. The composite cannot be turned off. |
On/Off |
|
Phase |
Turns the Phase curve display on and off. |
Off/On |
|
Control Name |
Function |
Range / Values |
|---|---|---|
|
Bypass |
Bypasses all bands of the equalizer. |
Off/On |
|
Invert |
Inverts the output signal of the equalizer. |
Normal/Inverted |
|
Mute |
Mutes the output of the equalizer. |
Off/On |
|
Reset |
Returns all of the band controls to their default positions. |
N/A |
|
Control Name |
Function |
Range / Values |
|---|---|---|
|
Bypass |
Bypasses an individual frequency band. |
Off/On |
|
Gain (dB) |
Controls the gain for an individual frequency band. |
Default = 0 Range = 0 to 40 |
|
Bandwidth (Octave) |
Sets the Bandwidth of an individual band of the equalizer. This is not active when either Low-shelf or High-shelf Type is selected. |
Default = 1.0 Range = 0.01 to 1 |
|
Frequency (Hz) |
Sets the center Frequency of an individual band. |
Default = 1 Range = 20 to 20000 |
|
Type |
Selects the type of equalizer for that band. |
Default = Parametric Choices - High-shelf, Low-shelf, Parametric |
1. The default is different for each band, and depends on number of bands. |
||
|
Property |
Function |
Value |
|---|---|---|
|
Band Count |
Sets the number of bands available in the Equalizer. |
1 to 32 |
|
Type |
Sets the type of input/output channels. Multi-Channel enables the Count Property. |
Mono Stereo Multi-Channel |
|
Count |
Sets the number of input/output channels for Multi-Channel. |
2 to 256 |
|
Enabled |
Enables or disables the graphical Response graph. |
Yes / No |
|
Size |
Sets the size of the graphical Response graph. |
Small / Medium / Large |
|
Pin Name |
Value |
String |
Position |
Pins Available |
|---|---|---|---|---|
|
(band) Bandwidth |
.010 to 1.00 |
.010 to 1.00 |
0.000 to 1.00 |
Input / Output |
|
(band) Bypass |
0 1 |
active bypass |
0 1 |
Input / Output |
|
(band) Equalizer Type |
1 2 3 |
Parametric Low-shelf High-shelf |
0 0.5 1.00 |
Input / Output |
|
(band) Frequency |
10 to 20000 |
10 Hz to 20 kHz |
0.000 to 1.00 |
|
|
(band) Gain |
-18 to 18 |
-18 dB to 18 dB |
0.000 to 1.00 |
Input / Output |
|
Master Bypass |
0 1 |
active bypass |
0 1 |
Input / Output |
|
Master Gain |
-20 to 20 |
-20 dB to 20 dB |
0.000 to 1.00 |
Input / Output |
|
Master Invert |
0 1 |
normal invert |
0 1 |
Input / Output |
|
Master Mute |
0 1 |
unmute mute |
0 1 |
Input / Output |
|
Master Reset |
trigger |
|||
© 2009 - 2016 QSC, LLC. All rights reserved. QSC and the QSC logo are trademarks of QSC, LLC in the U.S. Patent and Trademark office and other countries. All other trademarks are the property of their respective owners.
http://patents.qsc.com.
Related Topics