Related Topics
The Mic/Line Out component provides eight channels of line-level output for devices other than QSC DataPort amplifiers. It is an integral part of the Core 110f. The Line Out converts the processed digital signal to analog and provides software controls before and after the convertor. Connections are made using eight three-terminal 3.5mm Euro style connectors.
The controls listed below are divided into sections to match the Control Panel sections. Each control listed in the Analog and Digital sections, are one per channel.
Once you establish the initial settings for a component, you can save those settings, along with all the other component's settings, in a Snapshot.
|
Control |
Function |
Default/Range |
|---|---|---|
|
Peak Output Level (dBu) |
Measures Peak Output level to the output device |
N/A |
|
Output Mute |
Mutes the output after the D-A converter and before the output. |
Off/On |
|
Max RMS Output Level (dBu) |
Controls the RMS output level after the D/A converter. |
Default = 21 Range = -10 to +21 |
|
Control |
Function |
Default/Range |
|---|---|---|
|
Peak Output Level (dBFS) |
Measures the Digital Signal level prior to the D/A converter. |
Green = good Yellow = close to clipping Red = clipping |
|
Clip |
Red LED indicating if the signal is being clipped. |
Off/On |
|
Clip Hold |
Holds the clip indication until manually cleared. |
Off/On |
|
Invert |
Inverts the audio signal. |
Off/On |
|
Mute |
Mutes the digital audio signal. |
Off/On |
|
Gain |
Controls the gain of the digital audio signal prior to the D/A converter. |
Default = 0 Range = -100 to +20 |
|
Control |
Function |
Default/Range |
|---|---|---|
|
Status |
Displays the current status of the amplifier both in text and color. The following is a list of possible status colors, and some example conditions. OK – Green – (0) – Audio is good, hardware is good. Compromised – Orange – (1) – Audio is good but a redundancy mechanism is active (one LAN down but the other is still up) or a non-fatal hardware problem exists (fans too slow, temperature higher than expected, etc.) Fault – Red – (2) – Audio is not passing, or hardware is malfunctioning or mis-configured (amplifier power off, audio streams broken, wrong type of I/O Card installed, loudspeaker short circuit, etc.) Missing – Red – (3) – A piece of hardware, defined in the design, has not been discovered. Audio is not passing through that piece of hardware. Initializing – Blue – (5) – In the process of firmware, configuration update, and design start. Audio is obviously bad. Not Present – Gray – A virtual component in the design, that is designated as Dynamically Paired, and Not Required ,has no hardware assigned to it. |
N/A |
There are no adjustable properties for the Line Out.
|
Pin Name |
Value |
String |
Position |
Pins Available |
|---|---|---|---|---|
|
Analog Level |
-120 to 24 |
-120dB to 24dB |
0.000 to 1.00 |
Output |
|
Clip |
0 1 |
false true |
0 1 |
Output |
|
Clip Hold |
0 1 |
false true |
0 1 |
Input / Output |
|
Digital Level |
-120 to 43 |
-120dB to 43dB |
0.000 to 1.00 |
Output |
|
Digital Gain |
-100 to 20 |
-100dB to 20dB |
0.000 to 1.00 |
Input / Output |
|
Invert |
0 1 |
normal invert |
0 1 |
Input / Output |
|
Max RMS Output Level (dBu) |
-40 to 21 |
-40.0dBu to +21dBu |
0 to .988 |
Output |
|
Digital Mute |
0 1 |
unmute mute |
0 1 |
Input / Output |
|
Output Mute |
0 1 |
unmute mute |
0 1 |
Input / Output |
|
Status |
0 1 2 3 4 |
OK (green) Compromised (orange) Fault (red) Unknown (red) Updating (blue) |
0 0.250 0.500 0.750 1.00 |
Output |
© 2009 - 2016 QSC, LLC. All rights reserved. QSC and the QSC logo are trademarks of QSC, LLC in the U.S. Patent and Trademark office and other countries. All other trademarks are the property of their respective owners.
http://patents.qsc.com.
