Open topic with navigation

Loudspeaker Monitor Component

The Loudspeaker Monitor is part of the Core component in the Inventory list.

When loudspeakers are connected to a QSC DataPort amplifier, you have the capability to monitor the output of the amplifier connected to a particular band of the loudspeaker (the direct input to the loudspeaker band). The Loudspeaker Monitor component provides the means to get the signal from the monitored loudspeaker to an output suitable for monitoring. For example, in your Schematic, you can connect the Loudspeaker Monitor's audio Output to a Line Out card, then to an amplifier that powers loudspeakers in a control room. Once the connections are made, you can control the Gain or Mute the signal to the "monitor" loudspeakers.

IMPORTANT:   You must have the Loudspeaker Monitor component in your design for the monitor functions on any of the loudspeakers to operate.

Controls

Once you establish the initial settings for a component, you can save those settings, along with all the other component's settings, in a Snapshot.

Properties

There are no Properties for the Loudspeaker Monitor.

Control Pins

The available Control Pins depend on settings in Properties.