Mixer objects allow access to Mixer components that have been named in the design. To create a mixer object, call Mixer.New( mixerName ). The mixer object uses a string specification to determine which inputs and outputs to apply changes to. The syntax supports either space or comma separated numbers, ranges of numbers or all (*). It supports negation of selection with the '!' operator.
|
Input/Output String Specification Examples |
|
|---|---|
|
Name |
Description |
|
* |
Everything |
|
1 2 3 |
channels 1, 2, 3 |
|
1-6 |
channels 1 through 6 |
|
1-6 9 |
channels 1 through 6 and 9 |
|
1-3 5-9 |
channels 1 through 3 and 5 through 9 |
|
1-8 !3 |
channels 1 through 8 except 3 |
|
* !3-5 |
everything but channels 3 through 5 |
|
Mixer Methods |
||
|---|---|---|
|
Name |
Arguments |
Description |
|
( ins, outs, gain, <ramp> ) |
Sets specified cross point gains with optional ramp time. |
|
|
( ins, outs, mute ) |
Sets specified cross point mutes with boolean |
|
|
( ins, outs, mute ) |
Sets specified cross point solos with boolean |
|
|
( ins, outs, delay, <ramp> ) |
Sets specified cross point delay with optional ramp time |
|
|
( ins, gain, <ramp> ) |
Sets specified input gain with optional ramp time |
|
|
( ins, mute ) |
Sets specified input mutes |
|
| SetInputSolo |
( ins, solo ) |
Sets specified input solos |
| SetOutputGain |
( outs, gain, <ramp> ) |
Sets specified output gain with optional ramp time |
|
( outs, mute ) |
Sets specified output mutes |
|
|
( ins, cues, enable ) |
Sets specified input cues enables |
|
|
( ins, afls, enable ) |
Sets specified input AFL enables |
|
|
( cues, gain, <ramp> ) |
Sets specified cue gains with optional ramp time |
|
|
( cues, mute ) |
Sets specified cue mutes |
|
| GetMixerCrossPoints |
( ins, outs) |
Gets specified cross point values |
|
mixer = Mixer.New("my mixer")
-- set all crosspoint gains to -100 over 5 seconds mixer:SetCrossPointGain("*", "*", -100, 5 )
-- mute inputs 3 - 6 mixer:SetInputMute("3-6", true ) -- set all output gains except 5 to 0dB mixer:SetOutputGain("* !5", 0 )
-- print all mixer crosspoints xpoints = mixer:GetMixerCrossPoints("3", "*" ) for k,v in pairs( xpoints ) do print( v.Input, v.Output, v.Gain, v.Mute, v.Delay, v.Solo ) end |
QSC.com | Software and Firmware | Resources | QSC Self Help Portal
© 2009 - 2018 QSC, LLC. All rights reserved. QSC and the QSC logo are trademarks of QSC, LLC in the U.S. Patent and Trademark office and other countries. All other trademarks are the property of their respective owners.
http://patents.qsc.com
