CobraNet Card (CCN32)

Type 2 Hardware

Type 2 hardware provides new cables and connectors between the I/O cards and main boards in Cores and I/O Frames. Due to this change, the Type 2 hardware is not physically compatible with the older hardware. You can still integrate the new I/O Frames and Cores in the same system with older hardware, but the I/O cards are not interchangeable. Type 2 hardware can be identified by a yellow label on the back of the Core and I/O Frame, and the bottom of the I/O cards.

The Q-SYS CobraNet card has 32 input and 32 output channels of CobraNet digital audio. Refer to the CobraNet Input and CobraNet Output topics for information about using the Q-SYS Designer components.

CobraNet Input/Output CCN32
Description	Up to 32 input and 32 output channels of CobraNet digital audio
Performance
Dynamic Range A-weighted	> 140 dB
Frequency Response 20 Hz - 20 kHz	± 0.2 dB
THD+N	-130 dB (typ)
Group Delay	Selectable:
	modeRate = 0x400: 1.479 mS (2.812 mS w/SRC enabled)
	modeRate = 0x500: 2.813 mS (4.146 mS w/SRC enabled)
	modeRate = 0x600: 5.479 mS(6.812 mS w/SRC enabled)
I/O Capacity	Selectable:
	4 x 4
	8 x 8
	16 x 16
	32 x 32 (Core only)
Bundle Packing	0 to 8 channels
CobraNet Network Transmitters	16
CobraNet Network Receivers	16
Configuration Management	Simple Network Management Protocol v1
Mute	Infinite attenuation (via digital mute)
Connectors	Two female RJ-45 connectors