I/O-8 Flex Channel Expander

The Q-SYS I/O-8 Flex Channel Expander adds several expansion capabilities to the Q-SYS platform.

Eight flex channels (software configurable as either a Mic/Line input with phantom power, or a Line Level output)
Audio-to-USB Bridging for integration with soft-codec applications for host PC
Control connectivity via GPIO and RS232
Versatile mounting accessories included
PoE+ or external power supply (not included)

Refer to the I/O-8 Flex Component for Q-SYS Designer setup and operation.

Refer to the I/O-8 Flex User Manual for specifications.

I/O-8 Flex Front Panel

OLED Display – Displays information about the I/O-8 Flex's settings and status.
NEXT button – Cycles through the OLED information pages
ID button – Locates the I/O-8 Flex in Q-SYS Designer GUI and Configurator
POWER LED – Illuminates blue when the I/O-8 Flex is on
USB Ports – USB Type A Host connectors (2)

I/O-8 Flex Rear Panel

Flex Channels – Eight user-configurable audio channels (mic/line input with optional phantom power or line output), balanced or unbalanced - blue connectors
12VDC, .1A OUT – The + connection uses the farthest left pins (not numbered) for both GPIO INPUTS and GPIO OUTPUTS
GPIO OUTPUT – 8 outputs, open collector (24V, 0.2A maximum) with pull up to +3.3V (pins 1-8 equal pins 1-8 in the Q-SYS Designer GPIO Output component)
Earth Ground – The ground connection uses the farthest right pins (not numbered) for both GPIO INPUTS and GPIO OUTPUTS
GPIO INPUTS – 8 inputs, 0-24V analog input or contact closure (pins labeled 1-8 equal pins 1-8 in the Q-SYS Designer GPIO Input component)
RS232 – Transmit and recieve, 3-pin, 5mm, Euro connector
USB B – USB Type B Device connector
LAN A/PoE+ – PoE+ power in, Q-LAN, control, VoIP, WAN streaming, AES67, etc., RJ45
USB A – USB Type A Host connectors
LAN B – Redundancy, Q-LAN, control, VoIP, WAN streaming, AES67, etc., RJ45
EXTERNAL POWER INPUT 24VDC 1.2A – Auxiliary power, 24VDC, 1.2A, 2-pin, 5mm, Euro connector

QSC.com | Software and Firmware | Resources | QSC Self Help Portal

© 2009 - 2018 QSC, LLC. All rights reserved. QSC and the QSC logo are trademarks of QSC, LLC in the U.S. Patent and Trademark office and other countries. All other trademarks are the property of their respective owners.

http://patents.qsc.com