The CDN64 Dante™ bridge card provides third-party Dante enabled digital audio products the ability to connect and interface with Q-SYS™ while maintaining low latency.
Interface Dante-enabled ‘front-of-house’ input sources with ‘back-of-house’ or ‘facility-wide’ Q-SYS solution for use in Performance venues such as theaters, auditoriums and houses of worship, as well as a solution to bridge their Dante-enabled sources, such as wireless microphones and digital mixers, directly Q-SYS for advanced processing and re-distribution over Q-Lan for larger LAN and WAN IT infrastructures.
Type 2 hardware provides new cables and connectors between the I/O cards and main boards in Cores and I/O Frames. Due to this change, the Type 2 hardware is not physically compatible with the older hardware. You can still integrate the new I/O Frames and Cores in the same system with older hardware, but the I/O cards are not interchangeable. Type 2 hardware can be identified by a yellow label on the back of the Core and I/O Frame, and the bottom of the I/O cards.
|
Q-SYS Dante Bridge Card CDN64 |
|
|---|---|
|
Description |
Dante network audio input and output bridge card |
|
Capacity and Sample Rate Support 1 |
64x64 channels at 44.1/48kHz 32x32 channels at 88.2/96kHz 16x16 channels at 176.4/192kHz |
| Connectors | Dual Female RJ45 |
1. Sample rate conversion to Q-SYS system standard 48 kHz. There is an SRC at the inputs and outputs with a delay of 2 ms each. |
|
QSC.com | Software and Firmware | Resources | QSC Self Help Portal
© 2009 - 2018 QSC, LLC. All rights reserved. QSC and the QSC logo are trademarks of QSC, LLC in the U.S. Patent and Trademark office and other countries. All other trademarks are the property of their respective owners.
http://patents.qsc.com
Related Topics