The Event Log page provides a listing of events that take place on the Q-SYS Core. The Event Log is stored on the Q-SYS Core (not within the design file), so events associated with a previous design are not cleared when saving and running a new design.
Note: Logged events are retained on the Core for a period of 31 days, with a maximum log size of 10 MB.
Events are listed by order of newest first. All logged events are assigned a severity level:
|
|
The event is an expected occurrence, indicating healthy operation. |
|
|
The event indicates compromised operation of the affected source and reduced functionality, such as a network redundancy (LAN B) communication problem. |
|
|
The event indicates a more serious issue with the affected source, such as a connection failure, clock sync fault, or missing device. |
To clear the event log, click Clear Events.
CAUTION: This action cannot be undone.
Click Show Filters to enable event log filtering. You can filter by severity, category, source, and with a defined date range.
Software and Firmware | Resources | QSC Self Help Portal | Q-SYS Help Feedback
Copyright © 2019 QSC, LLC. Click here for trademark and other legal notices. |
Normal
Warning
Error