The User Control Interface (UCI) Viewer is a stand-alone, Windows based application used to discover and run Q-SYS UCIs over a local area network.
The Q-SYS UCI Viewer for Windows is available on the QSC web site (http://qsc.com) as part of the Q-SYS Software download. You can save the downloaded .exe file and copy it to as many Windows devices as necessary, then run/install it on each device. It is highly recommended that you download and install the same version UCI Viewer as your Q-SYS Designer. The number, for example "3.3.xxx", in the file name indicates the version.
Note: For remote access, refer to the section titled "Remote Access with Q-SYS UCI Viewer" below.
Note: Hover over the Current Design name to see information about the Core running the design, or the PC Emulating the design.
If you want a UCI to automatically run when Windows starts:
Because the UCI Viewer runs on a Windows based PC, many of the Windows functions work with the UCI Viewer. You can use your mouse to make selections, or if a touchscreen is available, you can use that as well. The UCI Viewer supports multi-button press sliding. Press and hold a button, then slide your finger or mouse over other buttons to change their states to match the first button you pressed.
Control |
Function |
---|---|
UCI Selection Panel (show/hide)
|
Clicking this icon shows or hides the UCI Selection panel. The default is show. |
Full Screen
|
Clicking this icon enters or exits the UCI Viewer full-screen mode.
|
Touchscreen Control Mode (On / Off)
|
Click this button to change the UCI display to Touchscreen Control mode. In Touchscreen Control mode, hovering and text entry are disabled, the mouse cursor is not visible. When the UCI Viewer is in Touchscreen Control mode, the login screen is a pin-pad instead of a dialog box. Touchscreen Control mode does not disable the mouse cursor over the toolbar, or the UCI Selection Panel. Touchscreen Control Mode is persistent. If you enable Touchscreen Control mode, close the UCI Viewer then reopen it, Touchscreen Control Mode is still enabled. However, Bookmark settings take precedence. You can save a UCI in Touchscreen Control mode as part of a Bookmark. |
Bookmark
|
Clicking this icon saves information about the currently running UCI, and the desired view of the UCI Viewer.
|
UCI and Design Filter
|
Clicking this icon gives you two fields "UCI", and "Design", with which you can filter the list of UCIs or Designs. Wildcard matching is case sensitive, and uses the following rules:
|
Toolbar (Hide)
|
Click the Toolbar button to hide the toolbar. Right-click, or touch-and-hold (Win 7/8) a menu displays. Click or touch Toolbar to restore the Toolbar. |
Help
|
Displays this help file. |
Software and Firmware | Resources | QSC Self Help Portal | Q-SYS Help Feedback
Copyright © 2019 QSC, LLC. Click here for trademark and other legal notices. |