You are here:

Date & Time

Click Edit to adjust the Q-SYS Core's date, time, and time zone. When finished, click Save.

Time Settings

Set the Date by clicking the calendar icon or by manually typing a date in month dd, yyyy format.
Set the Time by clicking the clock icon or by manually typing the time in hh:mm:ss format.
Set the Time Zone using the drop-down menu.

Enable NTP (Network Time Protocol) to synchronize the Q-SYS Core's clock with an NTP server.

After enabling NTP synchronization, it takes a few seconds for the change to take effect. Refresh the page to see the NTP-synchronized time.

Click + Add to add an NTP server to the list. By default, Q-SYS Core Manager uses NTP servers 0.pool.ntp.org and 1.pool.ntp.org.

Note: If you have redundant Cores, enable NTP on both the Primary Core and Backup Core using the same NTP servers.