You are here:

QSC Compatible Hardware

Q-SYS has been designed to integrate with the following QSC DataPort amplifiers and loudspeakers to provide telemetry, control and audio monitoring capabilities beyond what is possible with generic amplifiers and loudspeakers. The compatible hardware from QSC falls into three categories, listed in this topic.

Amplifiers
Loudspeakers
Wall Control Plates
DataPort Line Out Adapter (DDI-111)

Amplifiers

CX Series

CX 2-Channel Models		CX 4-Channel Models	CX 8-Channel Models
CX302	CX702	CX204V	CX108V
CX302V	CX902	CX254	CX168
CX502	CX702	CX404
CX602V	CX902

DCA Series

DCA 2-Channel Models	DCA 4-Channel Models
DCA1222	DCA1644
DCA1622	DCA1824
DCA2422
DCA3022
DCA3422

PowerLight® Series (Discontinued, Compatible with Q-SYS)

PowerLight 1.0	PowerLight 3.4
PowerLight 1.0HV	PowerLight 4.0
PowerLight 1.4HV	PowerLight 6.0
PowerLight 1.8	PowerLight 6.0 II
PowerLight 2.0HV	PowerLight 9.0

PowerLight 2 Series (Discontinued, Compatible with Q-SYS)

Contact QSC Support
PL218	PL230
PL224	PL236

PowerLight 3 Series

PL325

PL340

PL380

Loudspeakers

AcousticDesign™ Surface Mount Loudspeakers

AD_S32T	AD_S52	AD_S82	AD_S282H
	AD_S52T	AD_S82H	AD_S282HT

AcousticDesign™ Ceiling Mount Loudspeakers

AD_C42T	AD_CI52T	AD_C81Tw
	AD_CI52ST

AcousticDesign™ Surface Mount Subwoofer

Contact QSC Technial Support
AD-S28Tw

Line Arrays

The Line Arrays and subwoofers listed below are pre-set in Q-SYS for Intrinsic Correction™

Line Arrays
ILA Line Array (	WideLine-10 Line Array (WL2102 / WL2102–w)	WideLine-8 Line Array (WL3082)

WideLine Series Subwoofers
WL118-sw ¹	WL218_sw ²	WL212_sw ³	GP218_sw	GP212_sw
1. Recommended for use with the ILA Line Array (WL2082-i) 2. Recommended for use with the WideLine-10 Line Array (WL2102 / WL2102–w) 3. Recommended for use with the WideLine-8 Line Array (WL3082)

WideLine Series Subwoofers

WL118-sw ¹

WL218_sw ²

WL212_sw ³

GP218_sw

GP212_sw

1. Recommended for use with the ILA Line Array (WL2082-i)

2. Recommended for use with the WideLine-10 Line Array (WL2102 / WL2102–w)

3. Recommended for use with the WideLine-8 Line Array (WL3082)

Wall Control Plates

WCP-1

WCP-2

DDI-11 (DataPort Line Out Adapter)

Details

Note: Use the instructions under Alternate Uses in the DDI-11 Installation Guide.

Software and Firmware | Resources | QSC Self Help Portal | Q-SYS Help Feedback