You are here:

Camera Router

The Camera Router (Schematic Elements>Video Components>Camera Router) allows you to route any of the Cameras in your design to any of the available USB Video BridgesS.

Controls

Control	Function	Default / Range
Camera / Bridge cross point buttons	Cameras are rows, and are listed down the left side of the control panel. USB Video Bridges are columns listed across the top side of the control panel. For the camera you want to rout, go along that row until you get to the Bridge column to which you want to send the video. Click the button at the intersection of the Camera row and Bridge column.	Default is Camera 1 with all available Bridges selected.

Control

Function

Default / Range

Camera / Bridge cross point buttons

Cameras are rows, and are listed down the left side of the control panel. USB Video Bridges are columns listed across the top side of the control panel.

For the camera you want to rout, go along that row until you get to the Bridge column to which you want to send the video. Click the button at the intersection of the Camera row and Bridge column.

Default is Camera 1 with all available Bridges selected.

Properties

Property	Function	Choices
Camera Count	Sets the number of Inputs on the component. One Input can have up to 256 Channels. See Type below.	1 to 255
Output Count	Sets the number of Outputs on the component. One Output can have up to 256 Channels. See Type below.	1 to 50
Image Buttons	When set to Yes, the image that the camera is producing is displayed on the button.	Yes / No

Property

Function

Choices

Camera Count

Sets the number of Inputs on the component. One Input can have up to 256 Channels. See Type below.

1 to 255

Output Count

Sets the number of Outputs on the component. One Output can have up to 256 Channels. See Type below.

1 to 50

Image Buttons

When set to Yes, the image that the camera is producing is displayed on the button.

Yes / No

Control Pins

The available Control Pins depend on settings in Properties.

Pin Name	Value	String	Position	Pins Available
Bridge n Camera n Select	0 1	false true	0 1.00	Input / Output
Bridge n Select	1 to 50	1 to 50	0 or 1.00	Input / Output

Pin Name

Value

String

Position

Pins Available

Bridge n Camera n Select

false

true

1.00

Input / Output

Bridge n Select

1 to 50

0 or 1.00

Input / Output

Software and Firmware | Resources | QSC Self Help Portal | Q-SYS Help Feedback