Reflect

Use the Reflect page to check for network connectivity issues between your Core and the Q-SYS Reflect servers, as well as register the Core with your Q-SYS Reflect Organization.

Note: See the Q-SYS Reflect Enterprise Manager Help online to learn about Enterprise Manager.

Prepare the Q-SYS Core for Monitoring

Enterprise Manager requires that your Q-SYS Core can securely access the Q-SYS Reflect Cloud servers.

  1. From the Core Manager menu, click Network Settings.
  2. Click Edit to modify the values. Consult your IT administrator and enter the appropriate IP Address, Net Mask, and Gateway to enable Internet access for the Q-SYS Core.
  3. Enable DNS. DNS servers are available from your IT administrator, or you can use public DNS servers such as those provided by Google (8.8.8.8 and 8.8.4.4).
  4. Click Save.

For more information, see the See Network Settings topic.

Time Synchronization helps to ensure that logs across multiple systems can be compared accurately.

  1. From the Core Manager menu, click Date & Time.
  2. Click Edit.
  3. Enable Time Synchronization and specify valid NTP servers. NTP servers are available from your IT administrator, or use time1.google.com and time2.google.com.
  4. Click Save.

For more information, see the See Date & Time topic.

Access Control enables secure, user name and password authentication for access to Core Manager.

  1. From the Core Manager menu, click Users.
  2. Click Enable Access Control, and follow the on-screen instructions to create an Administrator user for your Core.
  3. Log back into the Core with your new credentials.

For more information, see the See Users topic.

Disabling unnecessary services on all network interface ports helps to harden the Core from an IT security perspective.

Note: The Q-SYS Core uses an outbound connection on port 443 (HTTPS and WSS) to connect with the Q-SYS Reflect cloud. Since this is a standard IT device connection, additional network or firewall configuration should not be necessary.

  1. From the Core Manager menu, click Network Services.
  2. Click the Management tab, and then click Edit.
  3. For the LAN interface with Internet access, deselect all services except for Q-SYS Designer Communications - Secure.
  4. Click Save.

For more information, see the See Network Services topic.

Register the Core

  1. Before proceeding, make sure your Core is properly configured. Follow the steps in See Prepare the Q-SYS Core for Monitoring.
  2. Click Test Connection to verify that the Core has a valid communication channel to the Reflect servers.

    Note: If you see any errors, refer to See Connection Troubleshooting.

  3. Select a Reflect Access level. The level you select becomes the highest permitted access level allowed to this Core, regardless of the Q-SYS Reflect user role:

    4. Note: Administrators and Technicians can also enable user access for the External Control Protocol and File Management Protocol. These permissions are set in Q-SYS Administrator using separate user PINs specifically for these purposes.

  4. Click Start Registration.
  5. Copy the Authorization Code. Use this code to add the Core to a Site in Q-SYS Reflect Enterprise Manager.

Connection Troubleshooting

If you see errors during a connection test, check with your IT administrator to ensure your connection is configured properly. Consider the following: