TSC-7t Touch Screen Controller

The TSC-7t Tabletop Touch Screen Controller combines capacitive touch technology with a bright 400 nits, 800 x 480 full color LCD for state-of-the-art control of a Q-SYS™ Platform. Touchscreen control is the ideal user-interface for sophisticated systems in which control needs can range from a few simple parameters, to recall of global snapshots. The TSC-7t can be used to control much more than just audio; a wide variety of equipment can be managed utilizing the Q-SYS Core’s GPIO, RS-232 and TCP/IP instruction mechanisms providing true one-touch control of third-party devices.

Note: This topic provides an overview of the TSC-7t peripheral. For installation instructions, see the Hardware Installation Guide online.

  • Consolidate Dialing and Control: In addition to the dialing functionality for your conferences, this 7" screen (800 x 480) can be used to control a myriad of third-party devices prevalent in boardrooms and meeting rooms via the Core (no additional control processor box required).
  • BYOD Options: Allows meeting participants to interface 2-way audio from Q-SYS to UC or web conferencing applications like Skype for Business™ and Go-to-Meeting™ via the touchscreen's micro USB connection.
  • Capacitive Touch Technology: Eliminates physical knobs and buttons increasing product reliability.
  • Single drop PoE cabling: Ethernet connection haves for simplified wire terminations without the need for additional power wiring.
  • Table Mounting System: Carefully designed weighted base with rubber pad prevents the touchscreen from sliding, while the included threaded brass Mounting Post offers permanent through-table mounting with clean cable management
  • Redundancy Options: TSC-7t provides two network ports for connection back to the Q-SYS Core.

Add the TSC-7t to your design inventory from the Peripherals category. The following components are available for the TSC-7t, depending on its Properties:

Front Panel

Capacitive-touch control surface and LCD viewing area (7" diagonal)

Rear Panel

  1. USB 2.0 Micro-AB OTG interface
  2. Q-SYS LAN A with PoE (RJ45)
  3. Q-Sys LAN B (redundancy) (RJ45)
  4. 12V DC AUX Power input (power supply not included)
  5. Unit Reset Button

Display

  

LCD

7” Projected Capacitive Touch (five coordinate simultaneous touch sensitivity)

Luminance

400 nits (400 lumen/candela per square meter)

Resolution

800x400

Rear Panel Control

Reset Button (Use a paper clip or similar tool to reboot the unit)

Power

  

PoE (Power over Ethernet)

IEEE 802.3af class 3 device via LAN A

Optional Power Source (not included)

12V DC AUX Power source (not supplied)

12V DC @ 1A (12W)

Barrel connector:

Negative contact – 5.5mm +/- 0.2mm

Positive contact – 2.5mm +/- 0.2mm

Length - 9.5mm +/- 0.3mm

Wireless connectivity

Bluetooth 4.0 + HS

Rear Panel Connectors

  

RJ45 (x2)

LAN A (PoE) and LAN B ports (10/100/1000 Mbps)

Barrel connector: Power inlet

Accommodates 12V DC AUX Power source

Side Connector

USB 2.0 Micro-AB OTG

Operating temperature range

0C to 50C

Dimensions (HWD)

4.7" x 7.8" x 5.0" (119 mm x 198 mm x 127 mm)

Weight

  

Net

1.9 lbs. (.86 kg)

Shipping

3.1 lbs. (1.4 kg)

Environmental

  

BTUs

40 max, 23 typical

Humidity

90% rh, non-condensing

Vibration

20 Grms

For more information, and to see a list of related documentation, visit the TSC-7t product page on the QSC website.