GPIO Out (NV-32-H)

The GPIO Out component represents the GPIO OUT connection pins on the rear of the NV-32-H. Use one of the included 5-pin Euro connectors.

+12V

12 V, 0.2 A output.

1, 2, 3

Three outputs, user-configurable in the component Properties. Pins 1-3 are the equivalent of pins 1-3 in the Q-SYS Designer GPIO Out component.

Ground

Earth ground reference for GPIO output connections.

This component does not have standard input and output pins. See Control Pins.

Note: See the HDMI I/O (NV-32-H) topic for other NV-32-H properties.

GPIO-1, 2, 3Type

Select the type of GPIO output:

• Digital Output (TTL 3.3V): 3.3VDC is supplied to the GPIO output pin when the Output control is enabled.
• Open Collector (200mA): 24V, 200mA max with pull-up to +3.3V.
• Raw: This mode is for advanced capabilities. If there is something you cannot do using the other choices, contact Q-SYS Support for assistance.

Output

This button sends a 0 in the Off position and a 1 (3.3V TTL) in the On position.

Invert

This button is available when the Type is Raw.

Pin Name	Value	String	Position	Pins Available
Output (Digital Output, Open Collector, Raw)	0 1	false true	0 1	Input
Invert1	0 1	false true	0 1	Input / Output
1. Available in the Control Pins list when Type is set to Raw.

Q-SYS device GPIO output states are undefined during boot-up and design redeploy. In the following table, "While On" and "While Off" indicate the button position as defined in the running design file. During a reboot or redeploy, the position may toggle depending on the GPIO type before returning to the defined position after the design starts running.

Bold text indicates a temporary GPIO position toggle during boot-up and redeploy.

NV-32-H GPIO

GPIO Type	While On	While Off
Digital Output	Toggles to Off	Stays Off
Open Collector	Stays On	Toggles to On
Raw	Toggles to Off	Stays Off