QSC Compatible Hardware

Q-SYS has been designed to integrate with the following QSC DataPort amplifiers and loudspeakers to provide telemetry, control and audio monitoring capabilities beyond what is possible with generic amplifiers and loudspeakers. The compatible hardware from QSC falls into three categories, listed in this topic.

Amplifiers

CX Series

  CX 2-Channel Models

CX 4-Channel Models

CX 8-Channel Models

CX302

CX702

CX204V

CX108V

CX302V

CX902

CX254

CX168

CX502

CX702

CX404

 

CX602V

CX902

 

 

DCA Series

DCA 2-Channel Models

DCA 4-Channel Models

DCA1222

DCA1644

DCA1622

DCA1824

DCA2422

 

DCA3022

 

DCA3422

 

PowerLight® Series (Discontinued, Compatible with Q-SYS)

PowerLight 1.0

PowerLight 3.4

PowerLight 1.0HV

PowerLight 4.0

PowerLight 1.4HV

PowerLight 6.0

PowerLight 1.8

PowerLight 6.0 II

PowerLight 2.0HV

PowerLight 9.0

PowerLight 2 Series (Discontinued, Compatible with Q-SYS)

Contact QSC Support

PL218

PL230

PL224

PL236

PowerLight 3 Series

PL325

PL340

PL380

Loudspeakers

AcousticDesign™ Surface Mount Loudspeakers

AD_S32T

AD_S52

AD_S82

AD_S282H

 

AD_S52T

AD_S82H

AD_S282HT

AcousticDesign™ Ceiling Mount Loudspeakers

AD_C42T

AD_CI52T

AD_C81Tw

 

AD_CI52ST

 

AcousticDesign™ Surface Mount Subwoofer

Contact QSC Technial Support

AD-S28Tw

Line Arrays

The Line Arrays and subwoofers listed below are pre-set in Q-SYS for Intrinsic Correction™

Line Arrays

ILA Line Array (

WideLine-10 Line Array
(WL2102 / WL2102–w)

WideLine-8 Line Array (WL3082)

WideLine Series Subwoofers

WL118-sw 1

WL218_sw 2

WL212_sw 3

GP218_sw

GP212_sw

1. Recommended for use with the ILA Line Array (WL2082-i)
2. Recommended for use with the WideLine-10 Line Array (WL2102 / WL2102–w)
3. Recommended for use with the WideLine-8 Line Array (WL3082)

Wall Control Plates

WCP-1

WCP-2

DDI-11 (DataPort Line Out Adapter)

Details

Note: Use the instructions under Alternate Uses in the DDI-11 Installation Guide.