Gain
The Gain Component is used to increase or attenuate the audio signal of up to 256 Channels simultaneously. You can simultaneously Bypass, Invert, and Mute all the Channels as well.
Properties
|
Property |
Function |
Choices |
|---|---|---|
|
Max Gain (dB) 1 |
Sets the maximum gain setting for this Gain component. |
-100 through +20 |
|
Min Gain (dB) 1 |
Sets the minimum gain setting for this Gain component. |
-100 through +20 |
|
Enable Ramp Controls |
Select whether to expose Increase, Decrease, Hold Off, and Time controls. |
No / Yes |
|
Mode |
With Enable Ramp Controls set to 'Yes', select whether the gain is adjusted in continuous fashion or in a discrete number of steps. |
Continuous Discrete |
|
Number of Steps |
With Mode set to 'Discrete', set how many steps it takes to go from the minimum gain value to the maximum gain value. |
3 to 100 |
|
Type |
Determines the Gain Component's channel type. |
Mono Stereo Multi-Channel |
|
Count |
Determines the number of channels for Multi-channel. |
2 to 256 |
1. You can lock the Gain setting by setting the Min and Max settings to the same value. If you specify a greater minimum than the maximum, the control simply works backwards within the limits you set. |
||
Controls
|
Control |
Function |
Default / Range |
|---|---|---|
|
Bypass |
Bypasses the Gain Component for all channels. |
Off / On |
|
Invert |
Inverts the polarity of the output signal for all channels. |
Normal/Inverted |
|
Mute |
Mutes the output for the all channels. |
Off / On |
|
Gain (dB) |
Adjusts the output gain for all channels. The range depends on the Min Gain and Max Gain settings in the Properties. |
Default = 0 Range = -100 to +20 |
|
Ramp Controls |
||
|
Increase |
Click to increase the gain. Click and hold to continuously increase the gain according to the Hold Off and Time controls. |
N/A |
|
Decrease |
Click to decrease the gain. Click and hold to continuously decrease the gain according to the Hold Off and Time controls. |
N/A |
|
Hold Off |
When clicking and holding the Increase or Decrease buttons, this is the amount of time it takes before the gain value starts to ramp. |
0ms to 60s |
|
Time |
When clicking and holding the Increase or Decrease buttons, this is the amount of time it takes to ramp from the minimum gain value to the maximum gain value. |
0ms to 60s |
|
Step Meter |
If Mode is set to 'Discrete', this meter indicates the level of gain. |
N/A |
Control Pins
|
Pin Name |
Value |
String |
Position |
Pins Available |
|---|---|---|---|---|
|
Bypass |
0 1 |
active bypass |
0 1 |
Input / Output |
|
Decrease |
0 1 |
false true |
– |
Input / Output |
|
Gain |
-100 to 20 |
-100 dB to 20 dB |
0.000 to 1.00 |
Input / Output |
|
Hold Off |
0.000 to 60.0 |
0ms to 60.0s |
0.000 to 1.00 |
Input / Output |
|
Increase |
0 1 |
false true |
– |
Input / Output |
|
Invert |
0 1 |
normal invert |
0 1 |
Input / Output |
|
Mute |
0 1 |
unmute mute |
0 1 |
Input / Output |
|
Time |
0.000 to 60.0 |
0ms to 60.0s |
0.000 to 1.00 |
Input / Output |
