Status (AVB)

The AVB Card Status component provides information about the condition of both the AVB In component, and the AVB Output component.

Controls

Control	Function	Default / Range
Status LED	This LED changes color to indicate the current status of the I/O-22 Output. See Status for the meanings of the various colors.	N / A
Status	Component status is conveyed with the Status LED and Status box, which uses both color and text to indicate the current condition: OK: The device is functioning normally. Initializing: The device is in the process of a firmware or configuration update, or the design is starting. Compromised: The device is functioning, but a non-fatal problem exists. Refer to the Status box for details. Missing: The device cannot be discovered. Fault: The device is malfunctioning or is not properly configured. Refer to the Status box for details. Unknown: This status appears during a Core reboot (for example, during a firmware update), or when a design is being uploaded to the Core and before it has started running. Not Present: If applicable to the device, this status appears when the device is not connected to the network and its Is Required component property is set to 'No'. This status also appears if the device component's Dynamically Paired property is set to 'Yes', pairing has not been assigned in Core Manager, and the device component's Is Required property is set to 'Yes'. See Dynamic Pairing.	N / A

Control

Function

Default / Range

Status LED

This LED changes color to indicate the current status of the I/O-22 Output. See Status for the meanings of the various colors.

N / A

Status

Component status is conveyed with the Status LED and Status box, which uses both color and text to indicate the current condition:

OK: The device is functioning normally.
Initializing: The device is in the process of a firmware or configuration update, or the design is starting.
Compromised: The device is functioning, but a non-fatal problem exists. Refer to the Status box for details.
Missing: The device cannot be discovered.
Fault: The device is malfunctioning or is not properly configured. Refer to the Status box for details.
Unknown: This status appears during a Core reboot (for example, during a firmware update), or when a design is being uploaded to the Core and before it has started running.
Not Present: If applicable to the device, this status appears when the device is not connected to the network and its Is Required component property is set to 'No'. This status also appears if the device component's Dynamically Paired property is set to 'Yes', pairing has not been assigned in Core Manager, and the device component's Is Required property is set to 'Yes'. See Dynamic Pairing.

N / A

Control	Function	Default / Range
Link LED	Indicates if there is a working connection to an AVB unit.	Red - no link Green - link
Full Duplex LED	Indicates if the link is communicating in both directions.	Red - no link Green - link
Speed	Up to 100Mbps maximum.	N / A
MAC Address	MAC address of the AVB card. Automatically populated.	N / A
Clock Source	Read / Write. The source of the clock signal. Internal: The clock comes from the AVB card. This is not the Q-SYS clock. AVB Input Stream <n>: The clock is derived from the Input Stream.	Internal AVB Input Stream <n>

There are no properties associated with the AVB Status component. Refer to the AVB Input and AVB Output topics.

The available Control Pins depend on settings in Properties.

Pin Name	Value	String	Position	Pins Available
AVB Clock Source	N / A	Text	N / A	Input / Output
Current MAC Address	N / A	Text	N / A	Output
Primary Full Duplex LED	1 2	Present Not Present	0 1	Output
Primary Link LED	1 2	Present Not Present	0 1	Output
Primary Speed	0 - 100	<n> Mbps	0 - 1	Output
Status	N / A	Text	N / A	Output