TSC-7w
The TSC-7w Wall Touch Screen Controller combines capacitive touch technology with a bright 400 nits, 800 x 480 full color LCD for state-of-the-art control of a Q-SYS system. Touchscreen control is the ideal user-interface for sophisticated systems in which control needs can range from a few simple parameters to recall of global snapshots. The TSC-7w can be used to control much more than just audio; a wide variety of equipment can be managed utilizing the Q-SYS Core’s GPIO and TCP/IP instruction mechanisms providing true one-touch control of third-party devices.
Note: This topic provides an overview of the TSC-7w peripheral. For installation instructions, see the Hardware Installation Manual online.
- Consolidate Dialing and Control: In addition to the dialing functionality for your conferences, this 7 inch screen (800 x 480) can be used to control a myriad of third-party devices prevalent in boardrooms and meeting rooms via the Core (no additional control processor box required).
- Capacitive Touch Technology: Eliminates physical knobs and buttons increasing product reliability.
- Single drop PoE cabling: Ethernet connection haves for simplified wire terminations without the need for additional power wiring.
- Redundancy Options: TSC-7w provides two network ports for connection back to the Q-SYS™ Core.
Add the TSC-7w to your design inventory from the Peripherals category. The following components are available for the TSC-7w:
Front Panel
Capacitive-touch control surface and LCD viewing area (7" diagonal)
Rear Panel
- Mounting-hook slots (4 places)
- Mounting screws (secures unit to the mounting ring)
- Q-Sys LAN A with PoE (RJ45)
- Q-Sys LAN B (redundant) (RJ45)
- USB 2.0 Micro-AB OTG interface
- 12V DC AUX Power input (power supply not included)
- Unit Reset button
- Built-in Speaker
- Screw holes (4 places - future use)
Display |
|
LCD Touchscreen |
7” Projected Capacitive Touch (dual coordinate simultaneous touch sensitivity) |
Luminance |
400 nits (400 lumen/candela per square meter) |
Resolution |
800x400 |
Rear Panel Control |
Reset Button (Use a paper clip or similar tool to reboot the unit) |
Power |
|
PoE (Power over Ethernet) |
IEEE 802.3af class 3 device via LAN A |
Optional External Source (not included) |
12V DC AUX Power source (not supplied) 12V DC @ 1A (12W) Barrel connector: Negative contact – 5.5mm +/- 0.2mm Positive contact – 2.5mm +/- 0.2mm Length - 9.5mm +/- 0.3mm |
Rear Panel Connectors |
|
RJ45 (x2) |
LAN A (PoE) and LAN B ports (10/100/1000 Mbps) |
USB type A port |
USB 2.0 Micro-AB OTG |
Barrel connector: Power input |
Accommodates 12V DC AUX Power supply |
Operating temperature range |
0C to 50C |
Dimensions (HWD) |
5.6" x 7.8" x 1.5" (143 mm x 198 mm x 38 mm) |
Weight |
|
Net |
1.4 lbs. (.64 kg) |
Shipping |
2.2 lbs. (1 kg) |
Environmental |
|
BTUs |
40 max, 23 typical |
Humidity |
90% rh, non-condensing |
Vibration |
20 Grms |
For more information, and to see a list of related documentation, visit the TSC-7w product page on the QSC website.