TSC Inventory Status Screen

This section details the functions available on the TSC hardware Inventory Status page. This page is used to access hardware information and run utilities / diagnostics as needed on the device.

The Inventory Status page can be accessed in two ways:

Status Information

Name

Displays the current name of the TSC unit.

LAN A

Displays the current IP address of the device.

Design

Displays the current running Q-SYS design.

UCI

Displays the current UCI

Utility Controls

Brightness Control Slider

This slide control is used to adjust the screen brightness.

ID

Locates the TSC in Q-SYS Designer and Configurator.

Clean Screen

This button starts a 30 second timer allowing you to clean the screen.

Log Off

When UCI Access is configured (see User Control Interfaces), this will log out the current user.

Screen Test

Runs diagnostic tests to verify screen functionality.

Factory Reset

Use to reset the TSC back to its factory default settings. You will be prompted to confirm reset before process proceeds.

Close

Closes the Inventory Status screen