Signal Probe Component
The Signal Probe is a tool you can attach to any audio output and measure the signal at that point using various other components such as a True Peak/RMS Meter, Responsalyzer, RTA - Band-Pass, and so on.
Input Pins
This component does not have any input pins available.
Output Pins
Output
Audio signal pins are represented by a () circle, and traditional wiring is represented by a thin black line. You can use Signal Names on audio signal pins.
By default, the Signal Probe component only has one output pin available.
Signal Probe Properties
This component has no configurable properties.
Graphic Properties
Label
Use the Label property to change the name of the component in the schematic. The Label property defaults to the component name. To learn more about renaming schematic elements, see Organizing Your Design.
Position
The coordinates reference a specific place in the schematic - for example,"100,100" (horizontal, vertical). 0,0 is the upper left corner of the schematic.
Fill
Sets the fill color of the component in the schematic.
Script Access Properties
Code Name
Displays the currently assign name for control access. You can use the auto-assigned name or customize it. Q-SYS will automatically check all Code Names in the design to ensure name is unique.
Script Access
Defines whether the component will be accessible by script and/or externally, or not at all. Choices include All, External, None (default), and Script.
- None (default) - Not accessible by any script, plugin, or by Q-SYS Remote Control Protocol (QRC).
- Script - Can be accessed by scripts, such as Text Controller, Block Controllers, and plugins only.
- External - Can only be accessed by 3rd party controls systems using component commands from the Q-SYS Remote Control Protocol (QRC).
- All - No restrictions, can be accessed by 3rd party control systems via Q-SYS Remote Control Protocol (QRC), or script objects or plugin objects.
Tip: Use Script Programmer Mode to quickly view the Script Access setting directly on the component in the design schematic without the need to disconnect from the Q-SYS Core processor.
Valid
Indicates if the connector the Signal Probe is connected to has a valid signal present or not.
Probe
In the Signal Probe Control Panel, click the Probe one time, then move it to the connector where you want to connect it and click that connector. The Probe is attached to that connector. To remove or move it, simply click the Probe and click in a blank area of the Schematic, or in the Signal Probe Control Panel, or a different connector.
Mute
Mutes the output signal of the Probe.
Gain (dB)
Sets the output Gain of the Probe.
Pin Name |
Value |
String |
Position |
Pins Available |
---|---|---|---|---|
Gain |
-100 to 20 |
-100 dB to 20 dB |
0.000 to 1.00 |
Input / Output |
Mute |
0 1 |
unmute mute |
0 1 |
Input / Output |
Valid |
0 1 |
unmute mute |
0 1 |
Output |