Connection
Q-SYS Designer to Q-SYS Core communications
Select how Q-SYS Designer communicates with the Q-SYS Core:
- Automatic: (Default) Q-SYS Designer will attempt to communicate with the Core using secure HTTPS (TCP port 443), but will use legacy HTTP (TCP port 80) and Q-SYS Control Binary (TCP port 1700) if secure communication is not possible.
- Legacy: Q-SYS Designer will only attempt to use legacy, unsecured protocols for communication with the Core.
- Secure HTTPS: Q-SYS Designer will only attempt to use secure HTTPS for communication with the Core.
Audio Monitor
Driver
Select an audio driver for use with the HoverMon feature, which allows you to listen to sound being processed on the Core via your PC's sound card. Select the driver that works best with your PC's configuration. HoverMon may not work properly on all PCs with all audio drivers.
Note: For Q-SYS Designer to stream HoverMon audio, HoverMon must be enabled in Q-SYS Core Manager > Network Services.
Buffer
Set the audio buffer to use with HoverMon, if available for the selected audio driver.
Test
Produces a tone (sent to your PC's sound card) using the selected driver.
