Controls
|
Control |
Function |
Default / Range |
|---|---|---|
|
Status LED |
This LED changes color to indicate the current status of the Core. See Status for the meanings of the various colors. |
N / A |
|
Status |
Displays color-coded messages indicating the current status of the active Core. OK - Green - Indicates that a UCI Viewer Client is connected, and gives the Client's hostname. Fault - Red - No Clients Connected displays when Is Required is set to Yes, and there are no clients connected to the UCI. Not Present - Gray - Not Present - No clients connected displays when Is Required is set to No, and there are no clients connected to the UCI. |
N / A |
|
Log Off |
If a user is required to log on to the UCI, this button can log them off. |
N / A |
|
UCI |
Displays the name of the UCI currently running on the UCI Viewer. You can change the currently running UCI if the UCI Assignment is set to Dynamic. |
User Defined |
|
Page |
Displays the name of the currently selected page in the UCI. You can click this field and change the viewed page. |
N / A |
Properties
|
Property |
Function |
Choices |
|---|---|---|
|
Name |
Identifies the UCI Viewer Status/Control component in Q-SYS Designer and any UCI Viewers having access the same network. |
User input |
|
Location |
User defined Location for the UCI Viewer. |
User input |
|
Is Required |
When Is Required is set to Yes, an error displays if there is no UCI Viewer client connected to the UCI Viewer. This is the default behavior. When Is Required is set to No, the UCI Viewer client is identified as not present, its status state is Not Present which is not considered an error. The color displayed for "Not Present" equipment is gray. |
Yes / No |
|
UCI Assignment |
The choices are Static, only the specified UCI is used, and Dynamic you can select the UCI when the UCI is running. |
Static/Dynamic |
|
UCI |
This field displays only when the UCI Assignment is set to Static. Use the pull-down list to select the UCI assigned to this UCI Viewer component. |
User Input |
Control Pins
|
Pin Name |
Value |
String |
Position |
Pins Available |
|---|---|---|---|---|
|
Current Page |
Text Field |
Input/Output |
||
|
Current UCI |
Text Field |
Output | ||
|
Log Off |
Trigger |
Input/Output | ||
|
Status |
N / A |
Status information |
0.00 = Good 1.00 = Error |
Output |
