Status

The Status page provides an overview of the health of the Q-SYS system, including a list of all devices in the running design and their statuses.

System Details

• Redundancy: Indicates the status of the redundant Core configuration (if redundancy is enabled in the design).
• System Name: By default, the System Name matches the Design File name. Click Rename System to assign a friendly name for the location or area being managed by this Q-SYS Core processor – for example, "Conference Room 1".

  Note: Once you assign a new name, that name persists even if the Design File name changes. To revert to the default name, click Rename System > Reset to Design File Name.

• Design File: The design file currently running on the Core.
• Last Update: A date stamp corresponding to the last time the design file was changed on the Core.

Core Details

• Name: This is the Core's hostname, as defined in the Network Settings page. See See Network Settings.
• Model: The Q-SYS Core processor model.
• Firmware Version: The Q-SYS firmware currently running on the Core.
• Card Slots: For Q-SYS Core processor models supporting Q-SYS I/O cards, click View to see a list of installed card types.

Inventory

The Inventory table lists all devices within the running design, and provides an at-a-glance view of their statuses, assigned names, types, Q-SYS model name, and location. Location information is determined from the Location component property in the design.