TSC-70-G3
The Q-SYS TSC Series Gen 3 are high-performance network touch screen controllers native to Q-SYS. The TSC-70-G3 is a 7-inch, PoE-capable (power over Ethernet) device that supports a wide range of fully-customizable user control interface applications for any space.
Note: This topic provides an overview of the TSC-70-G3. For specifications and installation documentation, see the TSC-70-G3 product page on the QSC website.
-
High performance 7-inch network touch screen controller native to the Q-SYS Platform
-
Enhanced onboard processor with increased resolution and significantly improved screen transitions on all models
-
Customizable RGB LED status indicators
-
Integrated proximity sensor wakes the screen on approach while an ambient light sensor adjusts screen brightness
-
Build intuitive and scalable UCIs in the same software program as your DSP and control programming for a streamlined design and deployment process
-
Supports CSS-based styling letting users build more dynamic UCI themes and apply global styles across multiple UCIs
-
UCI Controller [BETA] is an alternative method of building UCIs from a template of control types to simplify deployment and scalability of multiple UCIs
-
Supports Power over Ethernet to allow for power and data on a single cable for simple, single cable installation
-
Supports landscape or portrait orientation when wall-mounted
-
Optional table top mount accessory available
-
Universal mounting options: Included accessories for mounting to US standard and European wall and junction boxes
These Inventory components are available for the TSC-70-G3:
Standard Components
Front Panel
- Proximity sensor. Refer to the Sensors topic.
- Ambient light sensor. Refer to the Sensors topic.
- NFC antenna. Refer to the Sensors topic.
- 7 in. 1280 x 800 display
Rear Panel
-
Docking magnet
-
RJ45, PoE/+ in
-
LAN LEDs
-
Left: Link/Activity
-
Right: Speed
-
-
USB Type C
Note: By default, USB 2.0 connections are not supported for TSC Series Gen 3 USB video bridging. There are two possible orientations for the TSC side of a USB-C cable and currently only one orientation is supported for USB 3.0 connections. The supported orientation for USB 3.0 depends on the type of USB cable and/or adapter used. The simplest method to quickly determine the correct USB cable orientation is to deploy a video bridging design with USB 2.0 disabled (set the TSC’s USB 2.0 Support property to “Disabled”) then connect a USB 3.0 capable Host device to the TSC through the USB 3.0 cable and/or adapter that will be used. If the TSC status indicates it is “Compromised”, flip the cable connection at the TSC connector. Once the TSC is not in a Compromised state, USB 2.0 can be re-enabled (set the TSC’s USB 2.0 Support property to “Enabled”). For more information, see the USB Video Bridge topic.
Tip: For most USB-C cables, orientation 1 is seen while the cable is connected with the logo side facing the RJ45 connection. QSC recommends using a USB-C to USB-A cable for most host PCs. USB-C only hosts should then use a common USB-C to USB-A adapter.
-
Exhaust vents
Profile
-
Mounting point for wall-mount bracket
-
Regulatory markings
-
Model identification
-
Programmable RGB LEDs. Refer to the Lightbar (TSC-G3, PS-TSCG3 Series) topic.
Product specifications and dimension drawings for the TSC-70-G3 can be found on the TSC-70-G3 product page on the QSC website.