VOIP In
The VOIP In component controls the input signal level for the incoming call. Refer to the Softphone topic for complete details.
Inputs and Outputs
Input Pins
This component does not have any input pins.
Output Pins
Output
Audio signal pins are represented by a (
) circle, and traditional wiring is represented by a thin black line.
By default, the VoIP In component allows for only one audio output. If Tone Output is set to Yes, then two audio outputs are available.
Properties
Tip: For additional properties not listed, refer to the Properties Panel help topic for more information.
Softphone Properties
Tone Output
When 'Yes' is selected, the Ring, Entry, Exit, and DTMF tones are fed to a separate output channel (Tone Output) on the VOIP In component. These tones can now be routed independent of the voice audio.
Enable Call Sync
When 'Yes' is selected, the Softphone VoIP In will be enabled for Call Sync. For more information, please visit Call Sync.
Controls
Peak Level (dBFS)
Measures the digital input signal.
Invert
Toggle button to invert the digital output of the Softphone In.
Mute
Mutes the output signal.
Gain (dB)
Controls the Gain of the digital output signal.
Control Pins
|
Pin Name |
Value |
String |
Position |
Pins Available |
|---|---|---|---|---|
|
Input Gain (level knob) |
-100 to 20 |
-100 dB to 20 dB |
0.000 to 1.00 |
Input / Output |
|
Input Invert (toggle button) |
0 1 |
normal invert |
0 1 |
Input / Output |
|
Input Mute (toggle button) |
0 1 |
unmute mute |
0 1 |
Input / Output |
|
Input Peak Level (level meter) |
-100 to 20 |
-100 dB to 20 dB |
0.000 to 1.00 |
Input / Output |
